What method can be used to remove the stain on the PVC hard board?

With the continuous development of the application population and main uses of PVC hard boards, some problems have begun to emerge. Only in the recent period, the manufacturers of high-quality PVC hard boards have received many users' inquiries about how to remove the stains on the top of the boards.

So which method can be used to remove the stains adhering to the PVC hard board reasonably? The way to remove the stain on the outer surface of PVC hard board will be described in detail below.

Method I: sponge soaking

There is no doubt that the outer surface of the PVC hard board is extremely smooth and flat. If there are stains adhering to the upper edge of the outer surface, the difficulty factor of removal is actually very low.

For some stains with relatively low cleaning difficulty coefficient, users can use water absorbing sponges to carry out soaking, but they should pay attention to the temperature when soaking and washing, and try not to use the water with too high temperature on the surface of PVC hard board immediately.

Method II: Scraping with scraper

If the PVC hard board sticks to some stains that are difficult to remove during the whole application process, such as glue chemicals with high viscosity, users can choose this method to remove the stains.

If a scraper spoon is used to scrape the hard to remove stains on the PVC hard board, be careful not to use sharp artifacts to prevent such equipment from scratching the outer surface of the PVC hard board, thereby endangering the service life.

Method 3: Towel suction

PVC hard board can not only be used as wall decoration raw materials, but also can be used as pavement in some large and medium-sized public places.

If the PVC hard board paved on the road is stained by the flow rate stains, the user can start such cleaning method at the first time and use a towel to absorb the stains on the surface before completely removing them.